Exposición9 dDesde la divulgación, 11 nov 2026, 2:50 p. m.
Detección12 minDesde la divulgación hasta su ingreso al índice
Decisión SSVCSeguir
Remediar en la ventana regular de mantenimiento
Sin explotación conocida, no automatizable e impacto técnico parcial. Hay versiones corregidas disponibles.
Timeline
Ciclo de vida de la vulnerabilidad
Hoy
Divulgación
Publicada
Evaluación SSVC +1
Explotación
Remediación
Monitoreo
Detectada +1
Fuente: ENISA EUVD
Verificada
11 nov 26
13 nov 26
16 nov 26
21 nov 26
11 nov 26
14 nov 26
16 nov 26
18 nov 26
21 nov 26
Fecha
Fase
Evento
Detalle
Divulgación
Publicada
CVE-2026-0326 divulgada · CVSS 1.7 (CNA)
Monitoreo
Detectada
Ingresó al índice
Monitoreo
Fuente: NIST NVD
Registro visto por primera vez en NIST NVD
Divulgación
Evaluación SSVC
CISA-ADP · explotación ninguna
Divulgación
Modificada
Última actualización del registro
Monitoreo
Fuente: ENISA EUVD
Registro visto por primera vez en ENISA EUVD
Monitoreo
Verificada
Última verificación contra las fuentes
Resumen
Resumen generado por IA · CC-BY 4.0 · 11 nov 2026
A buffer overflow in PAN-OS, the Palo Alto Networks software, lets an attacker who can reach it over the network, without logging in, crash a service process or corrupt memory, which disrupts service processing. The description also states that Panorama and Prisma Access are not affected.
Descripción original del registro (palo_alto)
A buffer overflow vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to disrupt service processing by causing a service process crash or memory corruption.
Panorama and Prisma® Access are not affected by this vulnerability.
Vector CVSS 4.0
Desglose de métricas
Opción resaltada = valor del vector · izquierda = peor caso · CNA
Sin exploits, módulos ni PoC públicos conocidos a la fecha de verificación.
Registro
EscenarioGENERALpalo_alto
configurationCustomers are impacted if the following conditions are true:
1. SCTP is enabled or
2. DNS proxy object is configured and enabled on the firewall or
3. OSPFv3 routing on an IPv6 interface is enabled.
To check if SCTP is enabled:
* Navigate to Device > Setup > Management (https://docs.paloaltonetworks.com/ngfw/help/10-2/device/device-setup-management) > General Settings and check if SCTP Security (https://docs.paloaltonetworks.com/service-providers/10-2/mobile-network-infrastructure-getting-started/sctp/configure-sctp-security) is checked.
* Navigate to Policies > Security (https://docs.paloaltonetworks.com/ngfw/help/10-2/policies/policies-security), inspect your active policy rules, and verify if an SCTP Protection profile (https://docs.paloaltonetworks.com/ngfw/help/10-1/objects/objects-security-profiles-sctp-protection) is applied under the rule's Actions tab to a rule allowing SCTP traffic.
Verify DNS Proxy Status:
* Navigate to Network > DNS Proxy (https://docs.paloaltonetworks.com/ngfw/help/10-1/network/network-dns-proxy).
* Review all configured DNS Proxy objects.
* Click to open each DNS Proxy object and verify whether the Enable checkbox is selected.
Verify OSPFv3 routing on IPv6
* Navigate to Network > Virtual Routers (https://docs.paloaltonetworks.com/ngfw/help/10-2/network/network-virtual-routers) (or Advanced Routing (https://docs.paloaltonetworks.com/ngfw/networking/advanced-routing)), open your active virtual router, and check under OSPFv3 (https://docs.paloaltonetworks.com/ngfw/networking/ospf/configure-ospfv3) to confirm if OSPFv3 routing is enabled on any IPv6 interface or subinterface.
* Navigate to Network > Network Profiles > OSPFv3 Auth (https://docs.paloaltonetworks.com/ngfw/networking/advanced-routing/create-ospfv3-routing-profiles) (or view the profile attached to the OSPFv3 area/interface). Inspect the SPI configuration (https://docs.paloaltonetworks.com/ngfw/networking/ospf/configure-ospfv3) to see if: ESP Authentication is set to NONE.palo_alto
MitigaciónCustomers can mitigate the risk of this issue by taking the following actions.
Detach the SCTP Protection profile from active Security Policy rules allowing SCTP traffic.
Disable configured DNS proxy objects:
* Navigate to Network > DNS Proxy (https://docs.paloaltonetworks.com/ngfw/help/10-1/network/network-dns-proxy).
* Click on each configured DNS Proxy object.
* Uncheck the Enable checkbox.
* Click OK and Commit the changes.
Update any active OSPFv3 Auth Profiles under Network > Network Profiles > OSPFv3 Auth (https://docs.paloaltonetworks.com/ngfw/networking/advanced-routing/create-ospfv3-routing-profiles) to use standard cryptographic authentication other than ESP-NULL.palo_alto
solutionVERSION MINOR VERSION SUGGESTED SOLUTION
Cloud NGFW Customers who prefer to upgrade can work with Palo Alto
Networks support to schedule an on-demand software upgrade.
PAN-OS 12.2 12.2.0 through 12.2.4-h* Upgrade to 12.2.4-h2 or later.
PAN-OS 12.1 12.1.0 through 12.1.10-h* Upgrade to 12.1.10-h4 or later.
PAN-OS 11.2 11.2.0 through 11.2.16-h* Upgrade to 11.2.16-h2 or later.
PAN-OS 11.1 11.1.0 through 11.1.16-h* Upgrade to 11.1.16-h5 or later.
All older Upgrade to a supported fixed version.
unsupported
PAN-OS versions
Prisma Access No action needed.palo_alto
Usamos cookies propias estrictamente necesarias para que el sitio funcione y sea seguro. Con tu permiso, también usamos almacenamiento local para recordar tus preferencias y medir el uso del sitio de forma agregada. Puedes aceptar, rechazar o configurar cada categoría, y cambiar tu decisión cuando quieras desde el enlace “Preferencias de cookies” del pie de página. Más información
Preferencias de cookies
Elige qué permites
Solo usamos tecnologías propias de este dominio. Sin publicidad ni rastreadores de terceros. Detalle en la Política de cookies.