CVE-2026-99578
Linux kernel denial of service in rtw88 USB driver
An attacker can leave a USB Wi-Fi access point unable to accept new clients and unresponsive until it is rebooted.
Texto original en inglés · Ver en español
Ciclo de vida de la vulnerabilidad
| Fecha | Fase | Evento | Detalle |
|---|---|---|---|
| Divulgación | Publicada | CVE-2026-99578 divulgada | |
| Monitoreo | Detectada | Ingresó al índice | |
| Monitoreo | Fuente: NIST NVD | Registro visto por primera vez en NIST NVD | |
| Monitoreo | Verificada | Última verificación contra las fuentes |
The Linux kernel's rtw88 USB Wi-Fi driver mishandles broadcast and multicast frames when the device runs as an access point, so the chip's transmit buffer can fill up. Once that happens, new clients cannot associate and the access point stops responding until it is rebooted.
Descripción original del registro (Linux)
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery In AP mode every broadcast and multicast data frame is routed to TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is asleep. The firmware drains that queue at beacon pace, a dozen or so frames per second measured on RTL8822BU, while one associated client's mDNS/SSDP chatter alone exceeds that. The excess accumulates inside the chip until the shared TX page pool is exhausted (measured: 14 of 1803 pages left). From that point every host-sourced frame queues behind the backlog: authentication responses reach the air seconds after the client has given up, so no station can associate anymore, and the beacon reserved-page download fails the BCN_VALID poll ("error beacon valid") because it needs pages from the same pool. The AP keeps beaconing, so the failure looks like a silent RX stall and only a reboot recovers. mac80211 already decides when after-DTIM delivery is needed: it sets IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one station is actually dozing. Honor that instead of routing unconditionally: flagged frames keep going through the high queue with the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1 ("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else leaves at line rate through the AC queues. This partially reverts the usb.c hunk of that commit, whose unconditional routing is what lets the backlog build up. On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with it, with the page pool staying healthy and no beacon errors logged.
Rangos afectados
Estado del parche por paquete
| Paquete / producto | Estado | Corregida en | Desde divulgación | Última versión |
|---|---|---|---|---|
Linux |
Corregida | 6.12.118, 6.18.64, 7.3.5 | — | — |
6.12.1186.18.647.3.5Arsenal público
Sin exploits, módulos ni PoC públicos conocidos a la fecha de verificación.
https://git.kernel.org/stable/c/8da3a71216a0ecd02980dff5cf9739376249fc72https://git.kernel.org/stable/c/aa383c35d3e3688da8da0993f751c7b4bab66b02https://git.kernel.org/stable/c/781af5ab5a848b3c0767c0f057bd6692e3b7c17ehttps://git.kernel.org/stable/c/c710c7c2e0380d7c0eeb33b686262edcaef7cb07Las referencias externas se muestran para copiar: cve.llama.ec no lo redirige a otros sitios.
