llamaCVEVulnerability Intelligence
/
Linux kernel

CVE-2026-99754

Linux kernel memory over-read in iSCSI ISID parsing

A remote iSCSI initiator can crash the host or read nearby memory using a malformed persistent reservation request.

Texto original en inglés · Ver en español

Sin parche publicadoscsi
Descargar PNG JSON
CVSS
—
N/D
Fuente: —
ExplotaciónSin evidenciaNo figura en CISA KEV
Exploits públicos0Ninguno conocido
ParcheSin parcheEl fabricante no ha publicado corrección
Exposición1 dDesde la divulgación, 20 nov 2026, 12:51 a. m.
Detección22 minDesde la divulgación hasta su ingreso al índice
Decisión estimadaSeguir
Remediar en la ventana regular de mantenimiento
Sin puntaje CVSS ni severidad publicados y sin explotación conocida. Estimación de Llama (sin evaluación oficial): remediar en el mantenimiento regular y revisar si la fuente publica más datos. No hay versión corregida: aplique mitigaciones.
Tranquilidad nivel Chimborazo nevado.Si esta te quita el sueño, no es por el CVSS.
Timeline

Ciclo de vida de la vulnerabilidad

Hoy
Divulgación
Publicada
Explotación
Remediación
Monitoreo
Detectada +1
Verificada
12:51 a. m.
01:13 a. m.
02:11 a. m.
12:05 p. m.
12:51 a. m.
09:40 a. m.
06:28 p. m.
03:17 a. m.
12:05 p. m.
FechaFaseEventoDetalle
Divulgación Publicada CVE-2026-99754 divulgada
Monitoreo Detectada Ingresó al índice
Monitoreo Fuente: NIST NVD Registro visto por primera vez en NIST NVD
Monitoreo Verificada Última verificación contra las fuentes
Resumen

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.

Versiones

Versiones afectadas

2.6.38
Remediación

Estado del parche por paquete

Paquete / productoEstadoCorregida enDesde divulgaciónÚltima versión
Linux
Sin parche — — —
Explotación

Arsenal público

Sin exploits, módulos ni PoC públicos conocidos a la fecha de verificación.

Referencias
Otrahttps://git.kernel.org/stable/c/29c5ce6465b5696fbdf8126fcd0a6946b005c8b7
Otrahttps://git.kernel.org/stable/c/8a71f25a34439e99e094fabb619f787d15aaf9ae
Otrahttps://git.kernel.org/stable/c/d1db24c32bbe7b998573392070c3a6bdd9f4066c
Otrahttps://git.kernel.org/stable/c/cdf4b87a18cb6a0ee26865cb1b7b5660a491d302

Las referencias externas se muestran para copiar: cve.llama.ec no lo redirige a otros sitios.